Console House 10 Mode Provozní pokyny stáhnout pdf (Strana 46)

3=COOL 4=TIME #=STAT

↑

For temperature sensors:

Upstairs

2=LOW 3=HIGH #=STAT

To set a temperature setpoint, press 2 (HEAT) or 3 (COOL).

For Celsius temperatures, press the ' # ' key prior to entering the

temperature to make the number negative. The Celsius temperature

may also be specified in 0.5 degree steps if three numeric digits are

entered. The third digit adds a .5 to the first two digits if it is any-

thing other than zero. Enter a leading zero if necessary.

In additions to setpoint changes, an energy saver may be turned On or

Off. It may also be turned On or Off for a specific duration.

To turn the energy saver Off, select 0 (OFF). To turn the energy saver

On, select 1 (ON). To turn the energy saver On or Off for a specific

duration, select 9 (TIME) prior to selecting On or Off. Enter the time

as described under Control - Unit Commands.

Downstairs

0=OFF 1=ON 2=HEAT

↓

Downstairs

3=COOL 9=TIME #=STAT

↑

ENTER TIME

MINUTES (1-99) #=H/M/S

Downstairs FOR 15M

0=OFF 1=ON

↓

The current status of a temperature zone may be displayed by selecting

' # ' (STAT) key from the main temperature menu. The status display

differs depending on the temperature zone type.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 135 136

Žádné komentáře

Console House 10 Mode Provozní pokyny Strana 46